TP Power 4080 Motor
TP Power 4080 Motor
SKU:TP-4080-2022KV-CM
Low stock
Couldn't load pickup availability
TP Power motors are made of the best materials that are available, and have high efficiencies (>90%) required for the most demanding applications.
We carry only the latest newest versions!
Please refer to the chart for detailed parameters.
This 8MM Shaft TP Power 4080 Motor comes with the preferred sealed end cap!
⚙️MOTOR SPECIFICATIONS
| 4080 2022KV CM | |
|---|---|
| KV | 2022 |
| Wind | D |
| Max Amps (A) | 324 |
| Max Volt (V) | 8S 34V |
| Continuous Power (W) | 6000 |
| Max Power (W) | 11000 |
| Max RPM | 68k |
| Internal Resistance (Ohm) | 0.00273 |
| No-load Current (A) | 4.2 |
| Shaft Diameter (mm) | 8 |
| Diameter X Length (mm) | 40X117 |
| Weight | 700g |
| Pole | 4 |
| 4080 2350KV CM | |
|---|---|
| KV | 2350 |
| Wind | Y |
| Max Amps (A) | 350 |
| Max Volt (V) | 8S |
| Continuous Power (W) | 6000 |
| Max Power (W) | 11000 |
| Max RPM | 68k |
| Internal Resistance (Ohm) | 0.00250 |
| No-load Current (A) | 4.5 |
| Shaft Diameter (mm) | 8 |
| Diameter X Length (mm) | 40X117 |
| Weight | 700g |
| Pole | 4 |
| 4080 2240KV SVM | |
|---|---|
| KV | 2240 |
| Wind | Y |
| Max Current (A) | 380 |
| Max Voltage (V) | 32 |
| Continuous Power (W) | 6200 |
| Max Power (W) - Less than 10 seconds for safety | 11200 |
| Max RPM - Less than 10 seconds for safety | 68K |
| No-load current (A) | 6 |
| Internal Resistance (Ohm) | 0.0019 |
| Weight (g) | 700 |
| Shaft diameter | 8mm |
| Output Shaft Length | 24mm |
| Diameter x length (mm) | 40 x 117 |
| Bolt pattern | 4-M4-25 and 4-M3-25 on the same plate to offer two choices |
| Poles | 4 pole |
| 4080 2400KV SVM | |
|---|---|
| KV | 2400 |
| Wind | D |
| Max Current (A) | 395 |
| Max Voltage (V) | 28.3 |
| Continuous Power (W) | 6200 |
| Max Power (W) - Less than 10 seconds for safety | 11200 |
| Max RPM - Less than 10 seconds for safety | 68K |
| No-load current (A) | 6.5 |
| Internal Resistance (Ohm) | 0.001992 |
| Weight (g) | 700 |
| Shaft diameter | 8mm |
| Output Shaft Length | 24mm |
| Diameter x length (mm) | 40 x 117 |
| Bolt pattern | 4-M4-25 and 4-M3-25 on the same plate to offer two choices |
| Poles | 4 pole |
Share
- 5 stars: 4 (100%)
- 4 stars: 0 (0%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
This motor is the business!!
Big razzle dazzle does it again! Always provides the top quality product and gets it to me very fast!
It would be nice to have a 4090 svm like the this 4080svm spec.
Thinks about
Arrived quick! Great motor for RC drag racing
What is the difference between the TP CM motor and the SVM?
Hey,
The CM motors rev a bit higher them the SVM motors with no load, but their maximum electrical power output is lower.
The SVM motors motors will also run the hottest, as they draw the highest amount of amps.
The torque profile of the motors is also a bit different, along with their Kv ratings.
The real world differance is rather small assuming you have the same model (Say, 4080CM vs 4080SVM).
However, one may still be able to squeeze a little bit more performance out of one of them, depending on the application,
