Perfect Pass Professional Monster 750W Soldering / Rework Station Full Kit!
Perfect Pass Professional Monster 750W Soldering / Rework Station Full Kit!
SKU:PP-PSRS-120V
Low stock
Couldn't load pickup availability
This station is a BEAST!
We have been personally using it for a very long time and ABUSING IT!
It's a monster! not just that it is super durable but the power is insane.
Super comfortable to use, if you forget to turn it off it will recognize it and go into sleep mode (not recommended of course).
You can easily adjust the solder iron temps and it will reach it in no time.
You can also easily adjust the heat gun temps and fan power.
This station has been designed for soldering QS8, XT90, XT60, EC5, SOIC, QFP, PLCC, BGA, SMD systems, but it can also handle heating, heat shrink sleeves, defrosting, dissolving adhesives, burning paints. Due to the powerful heater, the soldering iron quickly reaches the set temperature and quickly compensates for heat losses during operation. This allows you to lower the operating temperature compared to cheaper models.
Technical Specifications Of Heat Gun / Rework
- Hot air temperature control: from 100°C to 480°C
- Air blowing source: fan (fan speed can be adjusted)
- Temperature stability: +/- 2°C
- Air flow: up to 120 liters/minute max
- Display: LCD
- Maximum length of the connecting cable: up to 90 cm
- The fan uses a brushless motor!
- The fan is quiet during operation and provides a stable level of airflow
Technical Specifications Of Soldering Iron
- Soldering tip temperature control: from 200°C to 480°C
- Temperature stability: +/- 2°C
- Potential between the tip and ground: < 2 mV
- Resistance between tip and ground: < 2 Ohms
- Cob soldering iron power: 60 W
- Protection: ESD Safe
- Display: LCD
- Maximum length of the connecting cable: up to 90 cm
- Very powerful! allows you to quickly reach the desired temperature and effectively compensates for heat loss during operation.
Share
Professional 750W soldering and rework station that customers praise as "top notch." Features fast heat-up, temperature control, and includes heat gun with auto shut-off. "Keeps up with professional systems costing hundreds of dollars at a fraction of the price." Minor issue noted with soldering pen collar tightening. One customer suggested lead-free solder inclusion.
- 5 stars: 27 (96%)
- 4 stars: 1 (4%)
- 3 stars: 0 (0%)
- 2 stars: 0 (0%)
- 1 star: 0 (0%)
The station is amazing, only issue I have is the soldering pen collar is unable to tighten fully to seat the heating end. Other than that it works great.
Nice setup
All I can say is this set up has taken my little bit of soldering skills to next level.. Really top notch setup.. First time I used, you would think I was a pro.. Perfect tool from Perfect Pass! Thank you!
The best one
Very nice set…
After having another unbranded work station that stopped working after 4 years I wanted to spend money on a well made one. I found this one by PP. After receiving it I love the sturdy quality of it. It heats up super fast and does an amazing job at soldering ec5 connectors and wires to castle motors. I love it!
Fantastic station!
The Best Motor for Limitless!
Great product, fast service
Seems to be a pretty good station.Haven't used the heat gun but did solder 6 qs8 connectors and all went well. Would love to see this station include lead free solder instead of leaded.
This is a very top notch soldering/hot air station. It heats up extremely quick. I have used professional systems in the field of electronics costing hundreds of dollars and this keeps up with them at a fraction of the price. Raz knows his stuff! Very impressed!
I love this Soldering station I highly recommend it.
Its funny how life works sometimes. in the middle of building a Perfect Pass car, my solder station of 23 years died. And look at that, Perfect Pass sells a station,,,, with a heat gun. Sold!
I was looking for a small heat gun anyway.
Unit works great, temps are consistent with both the iron and heat gun. Very happy Panda.
Very nice soldering / rework station love it everything you need and more
I just received this but, have t had a chance to put it to the test. As far as setup, I love it. It doesn't take up much room and is easy to operate. Very impressed with the amount of stuff you get with it. Worth the price.
Very pleased. Nice quality.
Awesome! I was using an in line iron that claims similar temperatures before i bought this. It ended up melting esc connectors before it would take solder, with the perfect pass solder station i have succesfully completed multiple esc and battery connectors perfectly!
VERY NICE RIG
THE RIGHT TOOL FOR THE RIGHT JOB.
I love this soldering kit! What really impressed me is the heat gun with temperature comteol. A very complete soldering station.
I love it, came with a few unrequirered accessories. Would have rather had some flux and some helping hands over a bunch of air tips but minor gripe as I knew what I was getting
I’m impressed. Very good. WILL buy from perfect pass
Absolute unit! Soldered some Qs8 connectors on my batteries and esc with ease. Sure beats the old Weller butane rig I've been using that I paid $70 for and didn't get all the extras this comes with.
This thing is awesome!! Works like a dream
This is an awesome product. Thanks for bringing it back to life. The price is great & the shipping was perfect. It heats up super fast. The hot gun shuts off automatically when placed back on the cradle. I’ve had several more expensive solder stations that didn’t perform as well as this one. Can’t go wrong with this purchase. Also received some cool stickers. Thank you.
Can the machine be switched from Celsius to Fahrenheit?
Yes, it can :)
